A Quality Product from
GeeePee Electrospark Pvt. Ltd. [View Profile]
Hyderabad - India
In production of tiles, the non-uniform loading generally introduces geometric deformation in tiles after firing. Iso-static punches, which utilize the principle of incompressibility of oil, minimize this defect and contribute immensely to better quality. Oil flows below a mat unnoticed but works asawonderful tool to absorb deformities such as worpage and non squareness.::
We Manufacturers of UPS (ONLINE AND OFFLINE), DIES & MOULDS, Entry and Mirror type of Moulds for a wide rage of presses.A typical Mould is shown here and mainly consists of the following parts :-
Rise Block / Ejector
Die Box / Matrix and Liners
Upper / Lower Punches
Isostatic Punches :-
To ensure unifrom geometry, the same specific pressure is required throughout the the tile. The non uniform loading and consequent differences in specific pressure which invariably lead to differences in shrinkage, can cause geometric deformations, highly undesirable in tile production. The principle of Iso-static pressing using rubber and oil is now widely accepted as the best solution to achieve uniform density of packing.
Iso-static punches have a special vulcanised rubber coating with small chambers underneath the squares formed by the ribs on the tile. These chambers are inter-connected and provide a channel for oil to flow. This way the pressure on the powder is exerted by a membrane tensioned over an oil-filled chamber. If the powder has lightening density on two different squares due to non-uniform loading, the same hydraulic pressure will be reached throughout the system as a result of the hydraulic principle of communicating vessels. When Iso-static Punches are inter-connected, they further enhance effectiveness in all the mould cavities.
GeeePee produces a variety of maintenance services for parts and tools. Our philosophy is to reach out to our customers through ongoing service and maintenance.
We provide :-
Services for regeneration of moulds, punches and liners.
-Service support in terms of spares and technicians to rectify defects in Presses.
-Services for regeneration of Clay-Feed-Carriages for better loading conditions.